What is the Enbio HEPA Filter?
The Enbio HEPA filter is a specialized, high-efficiency filtration component designed for the Enbio S & Enbio Pro Autoclaves ensuring 99.999% bacterial and 99.9999% virus filtration efficiency. It protects the sterilization process by preventing contaminant penetration.
How often do I need to replace the Enbio HEPA Filter?
The Enbio HEPA filter needs to be replaced every 1000 process.
How much does the Enbio HEPA Filter cost?
The Enbio Filter can cost anywhere between $25-$45 depending on where you buy it from.
How to install the Enbio HEPA Filter.
To install the HEPA filter on an Enbio S or PRO autoclave, carefully screw the filter by hand into the designated port on the back of the device, turning the filter approximately 7-9 times until you feel slight resistance. Do not overtighten, as this can damage the filter and sterilizer.
When replacing the Enbio HEPA Filter simply unscrew the filter and install new one.
How to remove the Enbio HEPA Filter alert.
To remove the HEPA filter alert on an Enbio S or Pro autoclave, you must manually reset the counter in the counters menu after replacing the HEPA filter.
On the main screen of the your device follow these steps:
- On the top right click the Info Tab
- Towards the bottom of the screen click the Counters button.
- Right next to the HEPA filter counter click the Reset button.
After following these steps the counter should have been reset to 0/1000
Watch this video to follow along.